Which way do you attach the trucks to a skateboard?

12
Agnes Treutel asked a question: Which way do you attach the trucks to a skateboard?
Asked By: Agnes Treutel
Date created: Tue, Jun 8, 2021 11:40 AM
Date updated: Fri, May 27, 2022 3:02 AM

Content

Top best answers to the question «Which way do you attach the trucks to a skateboard»

  • pop through the screw holes in your skateboard deck…
  • attach the skateboard trucks to the screws.
  • Inserting the Bearing in the Skateboard Wheels…
  • Installing Skateboard Truck Hardware. If you haven't done so already,pop through the screw holes in your skateboard deck…
  • Attaching the Skateboard Trucks. With the large bolt (kingpin) facing the center of the deck,attach the skateboard trucks to the screws.
  • Inserting the Bearing in the Skateboard Wheels…
  • - Attach one truck at a time. Some hardware kits come with multiple colored screws… - Use your fingers or the palm of one hand to hold the hardware in place while you attach the trucks… - Make sure that the kingpins on both trucks, the portion of your trucks with the large nut and rubber bushings, are facing each other…

FAQ

Those who are looking for an answer to the question «Which way do you attach the trucks to a skateboard?» often ask the following questions:

🚗 Which skateboard trucks are the best?

KRUX Skateboard Truck. The Krux K4 skateboard trucks are made for all type of players. Whether you’re a beginner, intermediate or expert skater, this product is guaranteed to hold your balance on the sharpest turns and those crazy tricks. It has some of the best cushions with a solid baseplate that nicely fits under the skateboard.

🚗 Which is the best brand for skateboard trucks?

  • Independent Trucks is the #1 choice of professional skateboarders since 1978. and “Built to Grind”! Skateboarding’s most iconic brand and leading manufacturer. of skateboard trucks, hardware, clothing, and accessories.

🚗 Which way do trucks face on a skateboard?

Skateboard Trucks Face What Direction? If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV recommendations. To ...

9 other answers

take the truck and put it on the opposite side of the griptape. then turn it until the big bolt is faceing the center of the board.

Line the truck’s baseplate up with 4 bolts and attach the nuts. Slide the small holes in the truck’s baseplate over the 4 bolts now sticking through the bottom of your board. Make sure the kingpin side of the truck is facing towards the inside of the board and the hanger side of the truck is facing the outside of the board.

Let us quickly get on with them. Base-plate: This is actually what its name suggests fits at the base of your board with bolts around to affix the truck to the skateboard. Hanger: The hanger is the 2nd most vital part and is pivoted with the base-plate via the pivot-cups.

So, as you can see we have got our four bolts through there, next step is to take the truck using your back hand, two fingers support the two rows of bolts and simply place the truck, on top of those, it takes a little bit of shimming as you can see.

Skateboards typically use Standard Kingpin (SKP) trucks, which are placed so that the kingpin and bushings of both trucks face each other. Conversely, many longboards, particularly larger ones, use Reverse Kingpin (RKP) trucks in which the kingpin is on the opposite side of the axle and therefore points the other way compared to SKP.

Typically, skateboard trucks consist of a base plate, hanger (the movable and grindable part of the truck to which your wheels are attached), the kingpin and kingpin nut which hold these two pieces together, as well as the bushings and the washers. The protruding part on which your wheels are attached is the axle.

Attach the nuts to the screws to hold the trucks loosely in place until you can fasten them securely. Using the skate tool or the adjustable wrench to hold the nuts in place, tighten the screws in a “crisscross” pattern: if you start with the northwest screw, tighten the southeast one next, then the southwest, then the northeast.

Pop the holes through the grip tape for the truck bolts. There are 8 holes drilled on a skateboard to accept the 8 truck bolts that fasten the Trucks to the board. You can use an Allen Key to carefully make the holes. Insert the 8 truck bolts through the holes in the grip tape and deck.

Take a screwdriver or Allen wrench and poke holes through the grip tape. Poke your holes downward so that the grip tape doesn’t crack and your hardware can screw in over the grip. Then place your screws through the holes in the deck. Once your screws are in place, attach your trucks onto your board. Attach one truck at a time.

Your Answer

We've handpicked 23 related questions for you, similar to «Which way do you attach the trucks to a skateboard?» so you can surely find the answer!

Are skateboard trucks different from longboard trucks?

Difference between Skateboard Trucks andLongboard Trucks:

Longboard trucks are wider, usually about 150mm-180mm, made for wider boards. Longboard trucks are usually reversed kingpins (the center bolt on which the hanger pivots), meaning the kingpin faces outwards.

Are bullet skateboard trucks good?

Is Bullet Trucks A Reliable Brand? Anyone who has used the products from Bullet can agree that this is an excellent brand. The trucks not only have the best high-quality build construction, but they also provide a great board feel and control.

Are havoc skateboard trucks good?

Havoc is one of the best skateboard trucks according to us since our research shows that Havoc has earned a name for providing with a continually decent quality skateboard truck for a reasonable price. This is supposed to be the lightest skateboard trucks in the present market.

Are light skateboard trucks better?

If you are not that very big, it is important to choose a light skateboard truck, especially if you are planning to do stunts with many jumps. If, on the other hand, you have a lot of strength to kick up the board, heavier trucks can be a better choice.

Are plastic skateboard trucks bad?

These are the worst boards ever. If you look at the wheels, you see that they got lines in them and are plastic. If you hit a rock, I bet that they'll lock up and you will go flying off of it and face plant. Their trucks are plastic too and you can't even turn with them.

Are wider skateboard trucks better?

Make sure the trucks you pick are the right size for your deck… A couple of pros skate narrow trucks that don't fit their board because it improves flip speed. Others like wider trucks because it provides a more stable ride. In general, just makes sure the axle width matches your deck's width.

Can you loosen trucks skateboard?

Hope you guys enjoyed this skate tutorial if you want me to make anymore just let me know comment below what kind of skate videos you want to see and what ki...

How are skateboard trucks made?
  • There are two common ways of making skateboard trucks: Die casting and gravity casting. Both require two moulds with the shape of the preffered truck shape - a lower and an upper mould. The two moulds are placed on top of each other and fild with a aluminium metal mix which makes the trucks light, hard, and durable.
How do skateboard trucks work?

trucks are all different. they vary in weight, design, and length. A kingpin is what makes it feel like you are barely doing anything to turn, or you have to lean a little weight. Independent trucks are the best in my opinion.

How to adjust skateboard trucks?

Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck.

  1. Turn it clockwise to tighten the trucks, getting tighter turning.
  2. Turn it counter-clockwise to loosen the trucks, getting a softer turning feel.
How to align skateboard trucks?

How to Align Skateboard Trucks : Skateboard Tricks & Tips - YouTube. How to Align Skateboard Trucks : Skateboard Tricks & Tips. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If ...

How to loosen skateboard trucks?

Hope you guys enjoyed this skate tutorial if you want me to make anymore just let me know comment below what kind of skate videos you want to see and what ki...

How to replace skateboard trucks?

Guide to Replacing Skateboard Trucks 01. Put the smallest socket of your skateboard tool over one of the nuts on your skateboard trucks. It doesn't matter... 02. Once all the nuts have been removed, simply take the trucks off the screws. You'll end up with a board that looks... 03. Removing the ...

How to size skateboard trucks?

To determine the width of a skateboard truck, you measure the width of the axle (outer width) and the width of the hanger (inner width). The trucks should always fit the width of your Skateboard.

How to stiffen skateboard trucks?

To tighten your skateboard trucks, start by flipping your board upside down and finding the big nut in the middle of the truck. Then, decide how tight you want your trucks, keeping in mind that tighter is better for high-speed skating, but means more resistance on turns.

How to tighten skateboard trucks?

Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck. This single bolt controls the tightness of the trucks. It points directly to the ground when you're skating, and is found between the wheels. Turn it clockwise to tighten the trucks, getting tighter turning.

How wide are skateboard trucks?
  • There are basically two widths to choose from: 150mm and 180mm. Again, the best (and easiest) way to select trucks for your cruising longboard skateboard is to choose trucks that are closest to the width of the deck. Cruising decks usually have widths less than 8.5”. These types of longboard decks need 150mm trucks.
What are hollow skateboard trucks?

Hollow Skate trucks are made using standard contruction materials, steel axles with aluminum hangers and baseplates. 'Hollow' is refering to the King pin and / or Axle being hollow. Having hollow steel components gives your board a lighter feel, that will pop higher and flip quicker.

What size are skateboard trucks?
  • Standard skateboards range in width from of 6.5 to 8 inches and in length from 28 to 33 inches. The skateboard trucks will be the same width as the skateboard they are on.
Where to buy skateboard trucks?

Browse and buy the best skateboard trucks in the industry. Shop Independent, Royal, Thunder, Theeve, Venture, and more. Free ground shipping on orders over $50.

Who makes good skateboard trucks?

KRUX Skateboard Truck. The Krux K4 skateboard trucks are made for all type of players. Whether you’re a beginner, intermediate or expert skater, this product is guaranteed to hold your balance on the sharpest turns and those crazy tricks. It has some of the best cushions with a solid baseplate that nicely fits under the skateboard.

Why do skateboard trucks squeak?

When you hear your board squeaking, it is usually the rubbers in the truck that are too dry. The hanger of your trucks turns in the pivot cup and that makes the noise. It is also possible that the bushings are too dry.

Are cruiser trucks and skateboard trucks the same?

The reversed kingpin sits in the hanger and faces outward while the standard kingpin sits through the screw and faces inside. And the difference between cruiser trucks and skateboard trucks is that most cruiser trucks have a reverse kingpin. This is because this type of kingpin is for cruising.