What does the clutch do on a motorcycle?

Freda Gutmann asked a question: What does the clutch do on a motorcycle?
Asked By: Freda Gutmann
Date created: Tue, Nov 2, 2021 12:02 PM
Date updated: Wed, Sep 28, 2022 8:04 AM


Top best answers to the question «What does the clutch do on a motorcycle»

What exactly does clutch do on a motorcycle?

  • The clutch on your motorcycle is a device that allows you to stop the engine from driving the transmission. This will prevent power from being output to the transmission and your rear wheel. This is absolutely necessary, because if constant power were being applied, you would be unable to do things like shift gears.

The basic job of the clutch is to temporarily disconnect the engine from the transmission and drivetrain system which drives the rear wheel. Unless that happens, it is nearly impossible to mate an idling engine with the transmission and move a geared motorcycle, which is at a standstill, forwards.


Those who are looking for an answer to the question «What does the clutch do on a motorcycle?» often ask the following questions:

🚗 What does a motorcycle clutch switch do?

the clutch switch works in conjuction with your neutral safety switch. If the bike is in gear, you have to pull the clutch in for it to start. This prevents you from starting your bike in gear. The clutch switch overrides the neutral safety switch.

🚗 How does a motorcycle clutch work?

Motorcycle clutch is a component which enables the engine power to engage or... This video explains the working of a Motorcycle Clutch with relevant animations.

🚗 What exactly does clutch do on a motorcycle?

  • The clutch on your motorcycle is a device that allows you to stop the engine from driving the transmission. This will prevent power from being output to the transmission and your rear wheel. This is absolutely necessary, because if constant power were being applied, you would be unable to do things like shift gears.

Your Answer

We've handpicked 22 related questions for you, similar to «What does the clutch do on a motorcycle?» so you can surely find the answer!

Motorcycle clutch fluid leak?

It could be from the fitting, the clutch line, or the master cylinder itself due to leaking seals. If you clean it up really well and inspect it very closely, it may become apparent where the leak is coming from. If it's from the master cylinder seals, which is the most likely cause, it will need to be rebuilt.

Wet clutch motorcycle oil?

Best motorcycle oil for a wet clutch

The key is to use a lubricant specifically formulated for wet clutches, such as AMSOIL synthetic motorcycle and dirt bike oils. They contain no friction modifiers or extreme-pressure additives. What is a hydraulic motorcycle clutch?
  • How Your Motorcycle’s Clutch Works. On some bikes (and some cars), the clutch is hydraulic, and operates via fluid pressure. There are plusses and minuses to each form of clutch. In general, the mechanical clutch requires more hand strength; the hydraulic clutch is more complex and requires more maintenance.
What is a motorcycle auto clutch?
  • The clutch in a manual-shift motorcycle transmission is typically an arrangement of plates stacked in alternating fashion, one geared on the inside to the engine and the next geared on the outside to the transmission input shaft.
What is a motorcycle clutch plate?
  • For most motorcycles, the clutch assembly is a stack of plates made of flat metal (steel and aluminum most commonly) that have a large hole in the middle making them look like a flat hoop. The plates are two types. friction plates (metal with a friction material bonded to them like a brake pad) Plain steel plates.
What makes a heavy clutch motorcycle?

There are several factors that can contribute to a stiff clutch. An old, worn or dirty clutch cable is one reason. Other factors include dirty lever, stiff clutch springs, dirty or worn actuator arm or push rod. Clutch position and hand strength can also be a factor.

Does holding the clutch down damage it motorcycle?

Riding your clutch in the friction zone on a motorcycle with a wet clutch will not cause damage… Some riders report turning corners with the clutch lever fully pulled in, coasting down a hill with the clutch in to save fuel, or holding the clutch in all the way while braking to stop at a traffic light.

How does the clutch work on a motorcycle?
  • The clutch lever acts like the clutch pedal in a manual transmission car as a connection between engine power and rear wheel. Fully squeeze in the clutch lever to cut off power to the rear wheel. The clutch on motorcycles is sequential, meaning that you can’t skip gears.
Why does my motorcycle clutch not shift gears?
  • If you can’t get the motorcycle to shift into certain gears and your gear shift lever by your foot just goes up and down freely, your clutch is bad. This is due to the clutch being stuck or seized altogether which in turn doesn’t let you change gears.
What does a bad clutch sound like on a motorcycle?

Chattering or Metallic Sounds

Any chattering or metallic sound when riding could point to clutch issues. Such noises start faintly but gradually grow. An experienced rider should be able to tell if it's a clutch problem.

What kind of clutch does a 4 wheel motorcycle use?
  • An automatic centrifugal clutch maintains constant belt tension for reduced belt wear and the system features a sprag clutch for all-wheel downhill engine braking in 4WD mode and reverse.
Why use open clutch pack on dry clutch motorcycle?

They’re used in MotoGP because in racing every little advantage helps, and as we mentioned before the dry clutch puts less drag on the engine. In the end, it’s ease of use, durability, and...

What is slipper clutch on a motorcycle?

A slipper clutch (also known as a back-torque limiter) is a specialized clutch with an integrated freewheel mechanism, developed for performance-oriented motorcycles to mitigate the effects of engine braking when riders decelerate.

What is the clutch on a motorcycle?

Its plates that disingage the transmission from the motor so you can shift it

How does a dry clutch work on a motorcycle?
  • In a wet clutch system on a motorcycle, the clutch pack is submersed in an oil bath filled with engine oil. The oil helps to cool the clutch plates. A dry clutch on a motorcycle, is very similar to a clutch on a car, with one or two large clutch friction plates.
How does a slipper clutch work on a motorcycle?

The slipper clutch is designed to partially disengage or 'slip' when the rear wheel tries to drive the engine faster than it would under deceleration. In very simple terms, a slipper clutch disengages or 'slips' until the engine and wheel speeds are compatible.

How much does it cost to replace motorcycle clutch?

Labor adds significantly to the clutch replacement cost when you entrust it to professionals. Total labor costs will vary between $500 and $700, making for a total repair cost that can fall anywhere between $600 and $1,1000.

Are motorcycle clutch cables universal?

If you have to ask them you don't have the skill to make another type or length of cable work safely on your bike; therefore, no they are not interchangeable. Technically a skilled person could modify one to work but it's important to have the right style barrel coupler for the lever and appropriate connector on the other end (barrel, clasp, nut, hook) as well as the correct length.

Can you bend motorcycle clutch?

The GS500 has an unusual clutch cable and lever. The cable comes off the perch at a 45* angle and then has a 45* bend in the metal tube part at the start of the clutch cable. To put high quality (like ASV) levers on, you need to change the perch and when you do that, the clutch cable won't fit.

Is clutch braking bad motorcycle?

Pressing the clutch while braking is, actually, a pretty bad thing to do. The clutch should only be used for shifting gears and when you are stuck in traffic, crawling along in the first gear. For slowing down, release the throttle and start applying both the brakes simultaneously.

Is hydraulic clutch better motorcycle?

Speaking of engagement, hydraulic clutches are generally easier to modulate and have a lighter, more consistent lever pull since there's a master cylinder and a slave cylinder amplifying your grip strength… So there you have it, a snapshot of the pros and cons of the two kinds of clutch actuation.

How much does it cost to replace clutch on motorcycle?

johnsprm69 said: about how much is it to put a new clutch in a 04 1k. my clutch is slipping and it's only been two weeks since i bought it this sucks. anyways just anna see how much this is gonna run me. thanks guys.