What does a clutch cable do on a motorcycle?

1
Hilda Altenwerth asked a question: What does a clutch cable do on a motorcycle?
Asked By: Hilda Altenwerth
Date created: Wed, Nov 3, 2021 4:40 PM
Date updated: Sun, Oct 2, 2022 8:50 AM

Content

Top best answers to the question «What does a clutch cable do on a motorcycle»

  • On motorcycles the clutch is operated by a hand lever on the left handlebar. No pressure on the lever means that the clutch plates are engaged (driving), while pulling the lever back towards the rider disengages the clutch plates through cable or hydraulic actuation, allowing the rider to shift gears or coast.

FAQ

Those who are looking for an answer to the question «What does a clutch cable do on a motorcycle?» often ask the following questions:

🚗 Can a motorcycle clutch cable stretch?

Clutch cables do eventually go, and once they start stretching they stretch faster and faster so its worth getting a new one, the tenner you'll spend will cost half as much as the gasket and oil you'd have to buy if you wanted to have a look at your clutch to see if that was playing up.

🚗 Can a motorcycle clutch cable be adjustable?

  • A motorcycle clutch cable might be adjustable, but only to a point. As shown in the photos above, the nuts on the locknut adjuster only have so much room to move.

🚗 How to fix clutch cable on motorcycle?

  • Put the cable barrel in place on the clutch lever. With the motorcycle clutch cable loosely in place, you should proceed by tightening the adjuster where the cable meets the engine. When fully tight it should sit against the clutch release. Loosen it slightly to give enough play in the clutch before you tighten the locking nut.

Your Answer

We've handpicked 25 related questions for you, similar to «What does a clutch cable do on a motorcycle?» so you can surely find the answer!

What to do with a broken clutch cable on a motorcycle?
  • If so, the switch is likely in the clutch perch, so you’ll still need to pull the lever in to start, even if it’s not connected to the cable. With the bike in neutral, start the engine and get it rolling up to about 5 or 10 mph. A hill helps here, as does a buddy riding alongside, pushing you with an outstretched leg.
How much does it cost to replace a clutch cable on a motorcycle?

How much does it cost to replace a clutch cable on a motorcycle? The average cost for clutch cable replacement is between $146 and $176. Labor costs are estimated between $68 and $86 while parts are priced between $78 and $90.

Can you ride a motorcycle with a broken clutch cable?
  • Here’s how to ride a motorcycle with a broken clutch cable. Note: These instructions are equally applicable whether you have a cable-actuated clutch or a hydraulic one. They do not apply if your actual clutch mechanism breaks, in which case you’ll be calling a tow truck. The lucky thing is, breaking a clutch cable is a rare occurrence.
Can you shift motorcycle to neutral after clutch cable breaks?

Clutch cables break by fraying, popping one strand after another over time. So it’s also something you can keep an eye out for, not something that’s likely to happen without warning.

How do you adjust the clutch cable on a motorcycle?
  • Tighten the clutch cable adjusters near the crank case so that they will not loosen during normal clutch use. Take the motorcycle for a test ride. While riding, use your left hand to adjust the barrel adjuster where the cable housing meets the clutch lever, to fine-tune the adjustments made previously.
What's the slack in the clutch cable on a motorcycle?
  • Take up the slack in the cable that leads to the clutch lever. Turn the adjuster at the lever counterclockwise until there’s just a small amount of slack of around 1/8 inch at most. Finish by tightening the locking nut before you put the clutch cover plate back on.
How do you know when to replace clutch cable on motorcycle?
  1. Frayed.
  2. Age of more than 2 years. Bike is parked outside without cover for most part of the year.
  3. Damage to the adjuster nuts.
  4. Kinked.
  5. Chaffing of outer rubber/coating.
  6. Throttling or clutching is taking an effort.
What does a motorcycle clutch switch do?

the clutch switch works in conjuction with your neutral safety switch. If the bike is in gear, you have to pull the clutch in for it to start. This prevents you from starting your bike in gear. The clutch switch overrides the neutral safety switch.

How does a motorcycle clutch work?

Motorcycle clutch is a component which enables the engine power to engage or... This video explains the working of a Motorcycle Clutch with relevant animations.

What does the clutch do on a motorcycle?

What exactly does clutch do on a motorcycle?

  • The clutch on your motorcycle is a device that allows you to stop the engine from driving the transmission. This will prevent power from being output to the transmission and your rear wheel. This is absolutely necessary, because if constant power were being applied, you would be unable to do things like shift gears.
What exactly does clutch do on a motorcycle?
  • The clutch on your motorcycle is a device that allows you to stop the engine from driving the transmission. This will prevent power from being output to the transmission and your rear wheel. This is absolutely necessary, because if constant power were being applied, you would be unable to do things like shift gears.
Can you start a bike without a clutch cable?

When there's no clutch, use the gas. The first thing you have to do is to put your bike in neutral. Otherwise, it won't start… If the lever is missing just, push the clutch switch.

Motorcycle clutch works?

How does a motorcycle clutch work automatic? On a motorcycle, we pull in the clutch lever in order to disengage the transmission, then slowly let the clutch lever out in order to engage the transmission gears with the engine — and the bike moves under power. Release the lever, and the friction plates catch on each other and engage the engine to the ...

What is a motorcycle clutch?
  • Basically a clutch is a mechanical device which is responsible for engaging and disengaging the engine crankshaft with the transmission gears. Multi-plate Clutch: The multi plate clutch is the most common type of clutch used in motorcycles.
What is motorcycle wet clutch?

Motorcycle wet-clutch 101

Wet clutches are widely used in motorcycles and dirt bikes. The term simply means the clutch is lubricated with oil, as opposed to a dry clutch. Friction plays a big role in proper clutch operation.

How does your motorcycle throttle cable work?
  • Motorcycle throttle cables consist of two steel cables that run from the grip of the throttle to the engine, to open and close the carburetor. Drivers use these two cables, the front cable and the idle-hand throttle cable, to accelerate the bike, just like a pedal is used to accelerate a car.
Does a motorcycle clutch use brake fluid?

For my motorcycle, the same grade (DOT 4) and type (brake fluid) is used in brakes and clutch systems. Make sure it’s a newly opened container of fluid. My motorcycle had one reservoir on the right handle bar for the front brakes.

How long does clutch last on motorcycle?

Typically you can expect your a motorcycle clutch to last between 20 000 and 60 000 miles. A clutch that is often slipped in the friction zone and that is not properly maintained may need replacement after as little as 5 000 miles, while many riders do well over 100 000 miles on the original clutch.

What does popping the clutch on a motorcycle mean?

also reffered to a dumping the clutch it is when you are in gear and holding the clutch in then you rev up the bike and release the clutch handle fast wouldn't recommend doing it sitting still

What function does the clutch serve in a motorcycle?

If you're familiar with operating a manual transmission in a car or truck it will come naturally. If not I hope this helps. Insure the bike is in “neutral”, usually indicated by a green light on the cluster. Squeeze the clutch lever (left lever) a...

How to fix a snapped clutch cable on a bicycle?
  • Get the longest one you can. Then measure the length and cut off the sheath (pull the wire out first) put the wire back in, connect to the lever, thread through the anchor to the lever on the motor and secure. Easy. Should take 15 minutes and cost 5 bucks. Yes....China Mart (Wal Mart) has a assortment of cables in a 3 pack for around $6.00...
Clutch plate motorcycle price?

Speedwav Makino Bike Clutch Plate Kit-Hero Splendor

M.R.P.:₹1,300.00
Price:₹699.00
You Save:₹601.00 (46%)
Inclusive of all taxes
Motorcycle clutch fluid leak?

It could be from the fitting, the clutch line, or the master cylinder itself due to leaking seals. If you clean it up really well and inspect it very closely, it may become apparent where the leak is coming from. If it's from the master cylinder seals, which is the most likely cause, it will need to be rebuilt.

Wet clutch motorcycle oil?

Best motorcycle oil for a wet clutch

The key is to use a lubricant specifically formulated for wet clutches, such as AMSOIL synthetic motorcycle and dirt bike oils. They contain no friction modifiers or extreme-pressure additives. What is throttle cable in motorcycle?

The throttle cable on a motorcycle connects the twist throttle to the throttle valves. Rotating the twist throttle pulls/releases the cable, which causes the valves to open and close. Some motorcycles (typically 2-stroke dirt bikes) feature one throttle cable while most 4-stroke machines come with a dual throttle cable.