Rebuilding spoked motorcycle wheels?

Patrick Powlowski asked a question: Rebuilding spoked motorcycle wheels?
Asked By: Patrick Powlowski
Date created: Fri, Jul 23, 2021 11:35 AM
Date updated: Wed, Sep 28, 2022 5:09 PM


Top best answers to the question «Rebuilding spoked motorcycle wheels»

  • To rebuild with high-quality stainless steel spokes and nickel-plated brass nipples is £199 per wheel. (Galvanised spokes are also available if required) Your motorcycle wheel may need a new rim. Steel rims are available as unfinished bright steel (ready for painting or other refinishing), excellent quality triple plated chrome or stainless steel.


Those who are looking for an answer to the question «Rebuilding spoked motorcycle wheels?» often ask the following questions:

🚗 Are spoked motorcycle wheels better?

Performance. Spoked wheels are all but mandatory on off-road bikes — dirt bikes, enduros, scramblers and ADVS — for one simple reason: spoked wheels are more durable than single-piece cast wheels… Spoked wheels can bend and flex to a certain degree letting you tackle the rougher terrain.

🚗 Are spoked motorcycle wheels dangerous?

Spoked wheels are all but mandatory on off-road bikes — dirt bikes, enduros, scramblers and ADVS — for one simple reason: spoked wheels are more durable than single-piece cast wheels. On the road, while riding around on your street bike, you (hopefully) don’t encounter large rocks or massive ruts — maybe the occasional pothole, but nothing as unrelenting as a backwoods single-track, that’s for sure.

🚗 Do you balance spoked motorcycle wheels?

Learn To Balance A Motorcycle Wheel

The correct way to balance a wheel is, of course, on a dedicated wheel-balance stand. But you can even do a rough job on your bike—the principles remain the same… Spoked wheels use crimp-on fishing-sinker-type weights, while cast wheels use adhesive-backed lead weights.

10 other answers

After the wheel has been laced, the nipples on all the spokes will need to be tightened. Tightening of the nipples should be done evenly and gradually. An even pattern can be used to tighten the spokes so that the rim does not become offset radially in one direction. Most wheels either feature 32 or 36 spokes.

Re-Building and Lacing Spoked Wheels Starting the Project. After the Schrader valve is removed from the tube, break the tire bead from the rim. A mallet may... Measuring and Photos. The next steps are the most important. Be sure to take photographs of the spoke layout on both... Getting Ready. With ...

Take one spoke and place it in the hole that matches the angle of the spoke meeting the rim. Thread the nipple on a few turns and move to the next spoke on the same side. Each inner spoke will have 3 holes in between them on the rim (every 4 th hole). Complete this process for every spoke on the one side.

Classic Motorcycle Wheel Rebuilds. If you are restoring or rebuilding your classic bike and want to refresh your wheels we will be pleased to oblige. We can offer Stainless Steel, Chrome Plated or Painted Steel rims with polished stainless spokes to provide wheels superior to the originals.

When it comes to rebuilding a wheel we are able to offer all the services you should require to transform that tired old hub into a shiny new wheel. From Polishing to Powder Coating, Central Wheel can perform a complete range of additional services to finish your wheel to the highest standard; we are even able to coach line your new rims to provide the most authentic possible look.


Motorcycle Wheel Building Prices. The cost for rebuilding your motorcycle wheel depends on whether I need to supply parts. I have fixed prices so you will know how much the rebuild will cost you before you agree to the work. If you already have all the parts the cost is £90 per wheel. To rebuild with high-quality stainless steel spokes and ...

Motorcycle wheel building specialist. Motorcycle rim and spoke suppliers. Aluminium and chrome rims, stainless steel spoke kits made to order.

We are able to offer a comprehensive wheel building service for virtually all motorcycle wire wheels (classic, modern, custom and off-road). We can offer a choice of Stainless steel or Alloy rims and a choice of polished or unpolished stainless steel spokes, with nickel plated brass, stainless steel or zinc plated nipples.Unlike many wheel builders, we are able to make our own spokes and dimple and drill rims.

Old Rusty Motorcycle Wheel Restoration About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features © 2021 Google LLC

Your Answer

We've handpicked 22 related questions for you, similar to «Rebuilding spoked motorcycle wheels?» so you can surely find the answer!

Can you use spoked rims on a motorcycle?
  • Brands like Arlen Ness, Performance Machine, RC Components and RSD are all leading the way in custom wheel designs that are sure to give your bike the look that you want. Of course there is still a place for spoked rims. A wheel with spokes is lighter and can flex far more than a solid wheel.
Do all spoked motorcycle rims need a tube?

Do you need tubes for spoked bike wheels?

  • H-D spoked wheels all need tubes , mags don't unless they have a pourous casting and leak . Most cycle tires these days are tubeless , doesn't matter what wheel they go on but tubes are still needed with spoked wheels .
Does motorcycle spoked rims need wheel weights balance?

Is it good to put wheel weights on motorcycle?

  • Even a slight weight imbalance in your wheels can cause extra vibration, and that’s not good for your bike. Keep things perfectly balanced for smoother rides and less vibration with motorcycle wheel weights.
How do you lace a spoked motorcycle wheel?
  • Tips on How to Lace a Motorcycle Wheel. Count and sort your spokes and nuts before you start. Always mark your first spoke at the rim. Don’t bend the spokes. Put some grease on the spoke thread and nut hole.
Can you use tubeless tires on spoked motorcycle rims?

In such cases, you can modify a wheel to be tubeless if the tires are tubeless, even if they are spoked wheels. The first step is to degrease and clean the inside of the rim and the spoke nipples with parts cleaner or acetone after assembly is complete. A round cut-out of butyl-based tape is applied over the spoke nipples.

Cast wheels motorcycle?

The spoked wheels are heavier than cast alloy wheels. This is one of the reasons you'll see only cast wheels on racing bikes. The difference comes in the overall weight – the tire adds up a lot to the total mass. Moreover, less weight means better handling.

Motorcycle training wheels?

Training Wheels is Massachusetts premier motorcycle training school with 8 convenient locations in MA. Bedford. Brockton. Cape Cod. Easton. Plympton. Wellesley. Pittsfield. Bellingham.

Is rebuilding a motor worth it?

Since the car is 20 years old it may not be worth much more than $2,000 even with a rebuilt engine and it may be worth about $500 as scrap… In this case, a full engine rebuild is not only worth it but also could also increase the value of a car that does not suffer from other wear and tear problems.

Are motorcycle training wheels?
  • Motorcycle training wheels are an inexpensive way to convert your motorcycle to a trike. These are assemblies that attach to your motorcycle. They go on both sides of your motorcycles rear axle as you can see in the photo below. Many kids had something similar on their first bicycles - called training wheels.
Who chrome motorcycle wheels?

Yes we can. The cost to just chrome strip a Motorcycle wheel starts at $100 per wheel. If your wheel is a Billet wheel and has Billet hubs, chrome strip pricing starts at $50 per hub. This removal chrome pricing is a guide line only, please contact us for your personalized estimate.

How to clean motorcycle wheels?

One of the ways to refurbish aluminum rims. Enjoy.

How to paint motorcycle wheels?

What is the best paint for auto wheels?

  • This method should work on steel, chrome, and aluminum alloy wheels, but you'll probably find the best results with steel. You'll need spray primer, spray paint, a wire brush, rubbing alcohol, tire shine gel, index cards, and soapy water. Start by giving your tire a thorough cleaning with soapy water.
Are lights on motorcycle wheels legal?

Crucially the use of flashing lights attached to regular bikes ridden by regular riders is illegal, yet flashing lights attached to clothing are legal. A belt, helmet or a jacket with LED lights is legal, and they can flash too… The only lights on a motorcycle which can automatically flash are the indicators.

Can i spray paint motorcycle wheels?

So we invite you to take a look at this article to see everything you can do with PINTYPLUS. To paint the wheels of your motorcycle you will need a suitable range of spray paint that is resistant outdoors and works well on metal surfaces.

Can magnetic motorcycle wheels be repaired?
  • Magnesium and aluminum motorcycle wheels are damaged in many ways, most of which are repairable within certain parameters. The bent wheel may wobble side to side, hop, or could have a simple dent or bend on one or both sides. The Wheel Warehouse Inc adheres to ACU-TRU® wheel repair guidelines.
Can motorcycle wheels be differents sizes?
  • That being said, motorcycles don’t have different sized wheels because it looks pretty. They’ve been engineered with different sizes for a reason. When people refer to a “bigger” or “larger” front wheel on motorcycles, they usually mean wheels that are taller (or bigger diameter) than the back wheel.
Can you chrome aluminum motorcycle wheels?

Yes, alloy wheels can be chromed… This process involves spraying the wheels with chrome paint. However, chrome plating aluminum alloy wheels is not recommended, as the process can weaken the aluminum.

Can you paint aluminum motorcycle wheels?

Aluminum can be painted, but it may not be very durable. You can improve the durability by using an etching primer, which does a better job of bonding to the metal. However, unless you have a pro set up in which you can bake the paint on, anything you do will be rather soft and easy to mar.

Can you powder coat motorcycle wheels?

Wheels on a motorcycle are specially susceptible to dings and scratches from rocks on the road and powder coating is able to withstand most of that. Powder coating can also impressively handle tire mounting machines quite well.

How do you clean motorcycle wheels?
  • Moisten the strips with soap and water. Wrap the strip of fabric around the spoke and pull it back and forth (like you were buffing or polishing shoes). Once the wheel spokes are cleaned to your satisfaction, rinse thoroughly with water. Be sure to rinse any all loosened dirt and debris. Dry with a soft cloth.
How to lace spoke motorcycle wheels?

What to put on spokes on motorcycle wheel?

  • Make sure that you put some grease (or other lubricant) on the thread of the spokes and the nut hole. This will make tightening the nuts smoother and easier when you’re truing the wheel. To keep the spokes in place you can put on the nuts very loose.
What are motorcycle wheels and rims?
  • Motorcycle Rims & Wheels Motorcycle wheels and rims come in all shapes and sizes to accommodate all of the different styles of bikes and riding. Unlike many other aftermarket upgrades that add performance, aftermarket wheels are almost purely a style upgrade.